Hi everyone,

I’m not sure if this is the right community, but the home networking magazines seem to be pretty dead. I’m a bit green with regard to networking, and am looking for help to see if the plan I’ve come up with will work.

The main image in the post is my current network setup. Basically the ISP modem/router is just a pass through and the 10 Gb port is connected to my Asus router, which has the DHCP server activated. All of my devices, home lab and smart home devices are connected to the Asus router via either Wifi or Ethernet. This works well, but I have many neighbours close by, and with my 30+ wifi devices, I think things aren’t working as well as they could be. I guess you could say one of my main motivations to start messing with this is to clean it up and move all possible devices to Ethernet.

The planned new setup is as follows, but I’m not sure if it’s even possible to function this way.

https://i.postimg.cc/7YftSFt6/IMG-9281.jpg

ISP modem/router > 2.5 Gb unmanaged switch > 2.5 Gb capable devices (NAS, hypervisor, PCs) will connect directly here, along with a 1 Gb managed switch to handle the DHCP > Asus router would connect to the managed switch to provide wifi, and remaining wired devices will all connect to the managed switch as well.

Any assistance would be appreciated! Thanks!

Edit: fixed second image url

  • dan@upvote.au
    link
    fedilink
    English
    arrow-up
    2
    ·
    edit-2
    1 year ago

    ONT is usually provided by the ISP (at least that’s the case where I live) and you can’t really do much with it in terms of customization, so I consider it part of the “internet” cloud in the picture. It’s essentially just a media converter from fiber to RJ45 or SPF+

    If the ISP provides a router, sometimes (but not always) the ONT is built into that. My ISP just provides an ONT and you need to either provide your own router or rent theirs (an Eero mesh).

    • rehydrate5503@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      This is exactly my case, where it’s built into the ISP provided router. Previous model had a removable SFP and some were able to use that on their own hardware, bypassing the ISP provided gear.