you might want to maybe try a different distro image to verify, maybe a simple kernel with a net image or something.
This part actually makes me wonder… Do you think SerenityOS uses the Linux kernel? Because it does not, it’s its own completely separate thing. And the hardware support for anything other than the standard emulated machine is very iffy, so it doesn’t seem too surprising that it would get tripped up by something on an old computer.
If anything went wrong with its USB stack for example, the kernel would have no way to find the root filesystem that’s stored on a USB drive.
At the weekend I’ll have some time to fiddle with it.
I think I’ll try to boot Serenity first from USB, check if it wants to boot at all. Maybe I’ll got an Arduino to use as serial monitor to check the log.
Then move on to flashing the grub image to the HDD, again, with a different IDE drive. if thst doesn’t work, I’ll find a SATA HDD and flash that.
I really wanna see this OS boot on real hardware. Then take a good lookaround and develop or port something for it :)
What do you mean by that?
I used x86_64 build, and my CPU is 64-bit. (Ran 64-bit Windows and different Linux systems on it before)
deleted by creator
Thanks for the tip, but I know, what I was talking about 😅
I use IDE HDD with this machine. The mobo has several SATA ports, but my HDD is IDE, it’s not a mistake.
Tho, that setting is, indeed is IDE, so I might set it to AHCI for Serenity, but the drive is still hoiked into the IDE bus.
But if the problem is the fact, that I’m trying to use IDE and should try with a SATA drive, I’ll look into it as soon as I can.
And thanks for co-piloting ;)
deleted by creator
This part actually makes me wonder… Do you think SerenityOS uses the Linux kernel? Because it does not, it’s its own completely separate thing. And the hardware support for anything other than the standard emulated machine is very iffy, so it doesn’t seem too surprising that it would get tripped up by something on an old computer.
If anything went wrong with its USB stack for example, the kernel would have no way to find the root filesystem that’s stored on a USB drive.
deleted by creator
At the weekend I’ll have some time to fiddle with it.
I think I’ll try to boot Serenity first from USB, check if it wants to boot at all. Maybe I’ll got an Arduino to use as serial monitor to check the log.
Then move on to flashing the grub image to the HDD, again, with a different IDE drive. if thst doesn’t work, I’ll find a SATA HDD and flash that.
I really wanna see this OS boot on real hardware. Then take a good lookaround and develop or port something for it :)
deleted by creator